2008 Southampton Boat Show - September 12-21
See the AIS WatchMate at the Southampton Boat Show - September 12-21.
The WatchMate is
made in New Zealand

WatchMate® Specifications


Size * 208mm wide x 135mm high x 76mm depth (8 3/16" x 5 5/16" x 3")
Flush mount thickness 17mm (11/16")
Power supply 10-16VDC - typical 1.2 watts (100ma@12V)
Environmental Watertight (USCG CFR-46, IP67)
Operating temperature 0°C to +70°C (32°F to 158°F)
Storage temperature -25°C to +80°C (-13°F to 176°F)
LCD panel 125mm (5") FSTN transflective daylight viewable 320x240
LCD light level Off and multiple levels of brightness
Serial data 2 input ports, 1 output port (EIA RS-232/CCITT V.24)
Baud rates 4800, 38400
Protocols IEC 61162-1, NMEA 0183, NMEA 0183 HS
Standards NMEA V2.x/V3.01, ITU-R M.1371-3
GPS NMEA sentence required RMC
Optional NMEA heading sentences HDG, HDM or HDT
AIS NMEA sentence required ** VDM
AIS Messages All class A and class B position reports, voyage data, static data, aids to navigation, and broadcast safety messages (1,2,3,5,14,18,19,21,24A,24B)
External alarm Maximum 2A switching without external relay


* Size does not include bracket or cable

** An external AIS receiver is required. Depending on where you purchase the WatchMate, the AIS receiver may be included in the package.

    Z1039

Specifications may change due to product improvements.